Zanthus Gravity Survey Results
Released
Released
Announcement PDF
Zanthus Gravity Survey Highlights
Dense Zones Coincident with Bedrock Conductors
st
21 May 2015
Highlights
Gravity results highlight areas of the highest density are surrounding and coincident
with the bedrock conductors at the Zanthus eye feature
Finding conductors coincident within the highest density zones is significant as these
could represent Fraser Range Gabbro intrusions which can host nickel massive
sulphides rather than sedimentary units that can also represent bedrock conductors
Rumble in the coming weeks will drill a cluster of 5 bedrock conductors in and around
an eye feature in a similar setting to the only known massive Nickel Sulphide
Discovery in the region Nova Bollinger
Ground EM programs are planned to further generate conductive targets from the
recently completed airborne magnetics and gravity surveys
Rumble Resources Ltd (“Rumble” or “the Company”) is pleased to provide an update on the
Zanthus Project located 20km’s east of the Nova-Bollinger nickel copper massive sulphide
discoveries in the Fraser Range, Western Australia. Rumble is earning up to 75% from Blackham
Resources Ltd (ASX: BLK).
As part of Rumbles systematic exploration program Rumble has completed a regional gravity
survey covering the entire Zanthus Project looking to identify dense intrusive bodies that may
represent Fraser Range Gabbro intrusions. The detailed gravity readings were on 500m by 500m
spacing with closer spaced infill readings around gravity highs identified. The program identified
the areas of the highest density located in the southern portion of the tenement. Significantly the
highest density locations are surrounding and coincident with the 5 bedrock conductors at the
Zanthus eye which are scheduled to be drill tested in the coming weeks.
In Figure 1 the Red zones with the white caps highlights the highest density zones within the
Zanthus Project. Finding conductors coincident within the highest density zones is significant as
these could represent massive sulphide Fraser Range Gabbro intrusions rather than sedimentary
units that can also represent bedrock conductors.
Rumble Resources Ltd
Suite 9, 36 Ord Street,
West Perth, WA 6005
T +61 8 6555 3980
F +61 8 6555 3981
rumbleresources.com.au
ASX RTR
Executives
Management
Mr Shane Sikora
CEO
Mr Terry Topping
Executive Director
Mr Andrew McBain
Non-executive Director
Mr Matthew Banks
Non-executive Director
Mr Michael Smith
Non-executive Director
Mr Bruno Seneque
Company Secretary
Figure 1: Gravity highlighting dense intrusive bodies surrounding and
coincident with the Zanthus bedrock conductors to be drill tested.
&
Upcoming Drill Program
Rumble in the coming weeks will drill a cluster of 5 bedrock conductors in and around an eye feature which is in a similar
setting to the only known massive Nickel sulphide discovery in the region – Nova Bollinger. The cluster of conductors and
mag features are very similar - see the comparison in Figure 2 and 3. Nova Bollinger was discovered when drilling a
bedrock conductor within an eye feature.
With the recent gravity highlighting dense zones surrounding and coincident with these conductors it further
enhances the status of these tier 1 drill ready targets.
Figure 2. Sirius Resources Eye Feature with conductor clusters and mag features
Figure 3. Rumble Resources Eye Feature with conductor clusters and mag features
Upcoming Zanthus Ground EM Program
Data from the gravity survey has been sent to Rumble geophysical consultants for further processing and 3D inversion
modelling. Rumble will integrate the magnetic and gravity data, which will form the basis for targeting the Company’s next
phase of Ground EM exploration set to commence over the following weeks. The company is targeting magmatic nickel and
copper mineralisation similar to the Nova Bollinger discovery made by Sirius Resources. The main Fraser Range gabbro host
units are generally magnetic lows and also relatively dense gravity highs with the recent surveys identifying these target zones
within the Zanthus Project area.
CEO Comments
Rumbles CEO, Mr Shane Sikora, said: “the Gravity identifying highly dense zones surrounding and coincident with the
bedrock conductors at the Zanthus eye feature further enhance these tier 1 drill targets. The gravity results are significant as
these dense zones could represent massive sulphide rich Fraser Range Gabbro intrusions rather than sedimentary units that
can also represent bedrock conductors.
Rumble is looking forward to drilling a cluster of 5 bedrock conductors in and around an eye feature in a similar setting to the
only known Massive Nickel Sulphide Discovery in the region Nova Bollinger.”
Shane Sikora
CEO
- ENDS -
For further information visit rumbleresources.com.au or contact enquiries@rumbleresources.com.au.
About Rumble Resources Ltd
Rumble Resources Ltd is an Australian based exploration company, officially admitted to the ASX on the 1st July 2011. Rumble was established with the
aim of adding significant value to its current gold and base metal assets and will continue to look at mineral acquisition opportunities both in Australia and
abroad.
Competent Persons Statement
The information in this report that relates to Exploration Results is based on information compiled by Mr Terry Topping, who is a Member of the Australasian
Institute of Mining & Metallurgy and the Australian Institute of Geoscientists. Mr Topping is a fulltime employee of Rumble Resources Limited and has
sufficient experience relevant to the style of mineralisation and type of deposit under consideration and to the activity which he is undertaking to qualify as a
Competent Person as defined in the 2012 Edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves”. Mr
Topping consents to the inclusion in the report of the matters based on his information in the form and context in which it appears.
Section 1 Sampling Techniques and Data
Criteria
JORC Code explanation
Sampling
techniques
Nature and quality of sampling (eg cut channels,
random chips, or specific specialised industry standard
measurement tools appropriate to the minerals under
investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc). These examples
should not be taken as limiting the broad meaning of
sampling.
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of mineralisation that are
Material to the Public Report.
In cases where ‘industry standard’ work has been
done this would be relatively simple (eg ‘reverse
circulation drilling was used to obtain 1 m samples
from which 3 kg was pulverised to produce a 30 g
charge for fire assay’). In other cases more
explanation may be required, such as where there is
coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (eg
submarine nodules) may warrant disclosure of detailed
information.
Drill type (eg core, reverse circulation, open-hole
hammer, rotary air blast, auger, Bangka, sonic, etc)
and details (eg core diameter, triple or standard tube,
depth of diamond tails, face-sampling bit or other type,
whether core is oriented and if so, by what method,
etc)..
Method of recording and assessing core and chip
sample recoveries and results assessed.
Measures taken to maximise sample recovery and
ensure representative nature of the samples.
Whether a relationship exists between sample
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of
fine/coarse material.
Whether core and chip samples have been
geologically and geotechnically logged to a level of
detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical studies.
Whether logging is qualitative or quantitative in nature.
Core (or costean, channel, etc) photography.
The total length and percentage of the relevant
intersections logged.
If core, whether cut or sawn and whether quarter, half
or all core taken.
If non-core, whether riffled, tube sampled, rotary split,
etc and whether sampled wet or dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation technique.
Quality control procedures adopted for all subsampling stages to maximise representivity of
samples.
Measures taken to ensure that the sampling is
representative of the in situ material collected,
including for instance results for field duplicate/secondhalf sampling.
Whether sample sizes are appropriate to the grain size
of the material being sampled.
Drilling
techniques
Drill sample
recovery
Logging
Subsampling
techniques
and sample
preparation
Commentary
Not applicable no samples were taken
Not applicable no drilling was completed
Not applicable no drilling was completed
Not applicable no drilling was completed
Not applicable no drilling was completed
Criteria
JORC Code explanation
Commentary
Quality
of
assay data
and
laboratory
tests
The nature, quality and appropriateness of the
assaying and laboratory procedures used and whether
the technique is considered partial or total.
For geophysical tools, spectrometres, handheld XRF
instruments, etc, the parametres used in determining
the analysis including instrument make and model,
reading times, calibrations factors applied and their
derivation, etc.
Nature of quality control procedures adopted (eg
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of accuracy (ie
lack of bias) and precision have been established.
The verification of significant intersections by either
independent or alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures,
data verification, data storage (physical and electronic)
protocols.
Discuss any adjustment to assay data.
Accuracy and quality of surveys used to locate drill
holes (collar and down-hole surveys), trenches, mine
workings and other locations used in Mineral Resource
estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
Not applicable no assaying was
completed
Scintrex CG-5 Autograv Gravity Meter
was used.
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient
to establish the degree of geological and grade
continuity appropriate for the Mineral Resource and
Ore Reserve estimation procedure(s) and
classifications applied.
Whether sample compositing has been applied.
Gravity data was completed on 500m by
500m spacing.
Whether the orientation of sampling achieves unbiased
sampling of possible structures and the extent to which
this is known, considering the deposit type.
If the relationship between the drilling orientation and
the orientation of key mineralised structures is
considered to have introduced a sampling bias, this
should be assessed and reported if material.
The measures taken to ensure sample security.
Not applicable
completed
.
The results of any audits or reviews of sampling
techniques and data.
No audits or reviews have been carried
out at this stage
Verification
of sampling
and
assaying
Location of
data points
Data
spacing and
distribution
Orientation
of data in
relation
to
geological
structure
Sample
security
Audits
reviews
or
Not applicable
completed
no
assaying
was
Gravity data was located by GPS.
Expected accuracy is +/- 5m for northing
and easting.
The grid system is GDA94(MGA), zone 51
The GPS is +/- 5m, and an estimated RL
is used from the 1:250,000
Not applicable for resources definition
There has been no compositing of the
data.
as
no
drilling
was
All data obtained was by independent
consultants
Section 2 Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral
tenement and
land
tenure
status
Type, reference name/number, location and
ownership including agreements or material issues
with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or national park
and environmental settings.
The security of the tenure held at the time of
reporting along with any known impediments to
obtaining a licence to operate in the area.
Acknowledgment and appraisal of exploration by
other parties.
The survey is located wholly within
Exploration Licence E69/2506 with
Rumble earning up to 75% from
Blackham Resources Ltd.
Located on Vacant Crown Land.
The tenement is in good standing and no
known impediments exist.
Geology
Deposit type, geological setting and style of
mineralisation.
Geological setting is the Albany Fraser
Mobile Belt consisting of gneiss, mafic
rocks including gabbro with significant
garnet in the metamorphic rocks.
The Company is exploring for magmatic
hosted base metal mineralization.
Drill
hole
Information
A summary of all information material to the
understanding of the exploration results including a
tabulation of the following information for all Material
drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation
above sea level in metres) of the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
If the exclusion of this information is justified on the
basis that the information is not Material and this
exclusion does not detract from the understanding of
the report, the Competent Person should clearly
explain why this is the case.
In reporting Exploration Results, weighting
averaging techniques, maximum and/or minimum
grade truncations (eg cutting of high grades) and
cut-off grades are usually Material and should be
stated.
Where aggregate intercepts incorporate short
lengths of high grade results and longer lengths of
low grade results, the procedure used for such
aggregation should be stated and some typical
examples of such aggregations should be shown in
detail.
The assumptions used for any reporting of metal
equivalent values should be clearly stated.
These relationships are particularly important in the
reporting of Exploration Results.
If the geometry of the mineralisation with respect to
the drill hole angle is known, its nature should be
reported.
If it is not known and only the down hole lengths are
reported, there should be a clear statement to this
effect (eg ‘down hole length, true width not known’).
Appropriate maps and sections (with scales) and
tabulations of intercepts should be included for any
significant discovery being reported These should
include, but not be limited to a plan view of drill hole
collar locations and appropriate sectional views.
Exploration
done by other
parties
Data
aggregation
methods
Relationship
between
mineralisation
widths
and
intercept
lengths
Diagrams
The only previous exploration includes
geophysical surveys by the GSWA and
Blackham Resources Ltd.
This information has been previously
released to the ASX..
There was no weighting or averaging of
the data..
Not applicable as no drilling was
completed.
The results at this stage are preliminary
and work is ongoing.
Criteria
JORC Code explanation
Commentary
Balanced
reporting
Where comprehensive reporting of all Exploration
Results is not practicable, representative reporting
of both low and high grades and/or widths should be
practiced to avoid misleading reporting of
Exploration Results.
Other exploration data, if meaningful and material,
should be reported including (but not limited to):
geological observations; geophysical survey results;
geochemical survey results; bulk samples – size and
method of treatment; metallurgical test results; bulk
density, groundwater, geotechnical and rock
characteristics; potential deleterious or
contaminating substances.
The nature and scale of planned further work (eg
tests for lateral extensions or depth extensions or
large-scale step-out drilling).
Diagrams clearly highlighting the areas of possible
extensions, including the main geological
interpretations and future drilling areas, provided this
information is not commercially sensitive.
The results presented are preliminary and
work is ongoing.
Other
substantive
exploration
data
Further work
Previous ASX releases by Rumble
Resources Limited have detailed aspects
of previous work undertaken within the
project area.
Further work is required to determine the
geological setting of the Project.
Share your feedback
Discover