High Grade Zinc-Lead Intersected at the Mato Prospect
Released
Released
Announcement PDF
5th October 2023
High Grade Zinc-Lead Intersected at the Mato Prospect
along the Sweetwater Trend – Earaheedy Project
Mato Prospect RC drilling – E69/3787 – RTR 100%
•
Significant high grade Zn-Pb mineralisation intercepted in RC drill hole
EHRC733 including:
•
16m @ 5.09% Zn + Pb from 153m (EHRC733)
Including 10m @ 7.05% Zn + Pb from 157m
•
Assay results from 17 holes from the preliminary broad spaced RC drill program
at Mato intercepted flat lying Zn-Pb mineralisation including:
•
9m @ 3.15% Zn + Pb from 165m (EHRC732)
•
46m @ 1.04% Zn + Pb from 104m (EHRC726)
Including 4m @ 5.16% Zn + Pb from 104m
•
14m @ 2.49% Zn + Pb from 154m (EHRC720)
•
Zn-Pb sulphide mineralisation is hosted within the Navajoh Unconformity Unit
and the Sweetwaters Well Dolomite, with near identical geological controls to
the Chinook, Tonka and Navajoh Deposits.
•
The width and tenor of mineralisation intercepted in EHRC733 indicates that
potential feeder faults exist at the Mato Prospect and confirms the prospectivity
of the 9km x 3km area to host high grade Zn-Pb sulphide mineralisation.
•
A ground gravity survey is scheduled to commence in October, which in
conjunction with the existing Airborne Gravity Gradiometry (AGG) survey, will
allow the Company to target new high grade feeders similar to that intersected
in EHRC733 within the Navajoh Unconformity Unit, and potential high-grade
structurally hosted MVT type mineralised positions.
•
Awaiting heritage clearance to explore the significant up dip and strike
potential where multiple feeder faults have been interpreted.
Rumble Resources Ltd
Level 1, 16 Ord Street,
West Perth, WA 6005
T +61 8 6555 3980
F +61 8 6555 3981
rumbleresources.com.au
ASX RTR
Executives &
Management
Mr Peter Venn
Interim Managing Director
Mr Matthew Banks
Non-executive Director
Mr Michael Smith
Non-executive Director
Mr Geoff Jones
Non-executive Director
Mr Brett Keillor
Technical Consultant
Mr Steven Wood
Company Secretary
Figure 1 – EHRC733 sulphide examples and sieved Navajoh Unconformity Unit. Left: EHRC733
select sieved sulphide bearing samples from interval 159-160m showing coarse sphalerite, galena,
and pyrite. Right: EHRC733 sieved Navajoh Unconformity Unit host lithology chips from 165-166m
1
Rumble Resources Limited (ASX: RTR) (“Rumble” or “the Company”) is pleased to announce the assay results for
the first 17 holes drilled at the Mato Prospect, at the Earaheedy Project (see Figure 2), located 110 km northeast of
Wiluna, Western Australia.
Figure 2 - Earaheedy Project – Location of Chinook and Tonka-Navajoh Deposits, and the Mato Prospect with partial leach
geochemistry highlighting the 9km long prospective area.
Mato Prospect RC Drilling – E69/3787 - RTR 100%
Drilling at the Mato Prospect commenced in mid-July (refer to ASX: RTR announcement 17th July 2023), within the
100% RTR tenements – E69/3787 and E69/3862, with the initial drill program designed as a broad (800-1600m)
spaced scoping program to test several high priority targets along the prospective Navajoh Unconformity Unit within
the 12km Sweetwater Trend, west of the Chinook deposit – see Figure 2.
The Company has only drilled 23 holes at Mato, with the assay results now received from the first 17 drill holes – see
Figure 3. The best result was returned from EHRC733 and included 16m @ 5.09% Zn + Pb, including a higher grade
zone of 10m @ 7.05% Zn + Pb - see Figure 1 and Figure 4. This intersection is interpreted to occur proximal to a high
grade feeder structure. Additionally, there are six holes with pending assays on the same drill traverse as, and
immediately down-dip of EHRC733 which have all intercepted visible Zn-Pb mineralisation recognised through
portable X-Ray Fluorescence (“XRF”) and logging – see Figure 4. Rumble cautions that identification of mineralisation
and reporting of visual results is not considered a proxy or substitute for laboratory analyses. Samples will be
despatched for laboratory analysis and results and will be reported upon receipt of assay results in accordance with
the Company’s continuous disclosure policy.
Seventeen holes from the current program returned Zn-Pb mineralisation (refer to Table 1) that occurs within the flat
lying Navajoh Unconformity Unit and the top of the underlying Sweetwaters Well Dolomite, which are also the host
lithologies for the Chinook, Tonka and Navajoh Deposits. These three deposits were recently reported as part of a
near surface, globally significant Inferred Mineral Resource Estimate of 94Mt @ 3.1% Zn+Pb and 4.1g/t Ag (at a 2%
Zn+Pb cut off) – refer to ASX release 19th April 2023.
2
Figure 3 - Mato Prospect – Location plan with Drill Hole status and intersections
A ground gravity survey is planned to commence at the Mato Prospect in October, which in conjunction with the
existing Airborne Gravity Gradiometry (AGG) survey will assist the Company to better target potential high grade
feeders within the unconformity related mineralisation along strike of EHRC733, and high-grade structurally hosted
MVT type mineralisation.
Ongoing heritage access is currently being conducted to advance exploration of the Mato Prospect, and most
importantly, allow Rumble to test both along strike and up-dip of EHRC733 within the previously outlined 9km x 3km
area where multiple feeder fault targets have been interpreted.
Next Steps
•
Discovery drilling
o RC drilling aimed at defining the limits of the emerging world class Zn-Pb-Ag base metal system within
the Navajoh Unconformity Unit, with a focus on discovering new high-grade feeders (cf. Kalitan,
Chikamin, Colorado and Magazine Feeder Faults) within the currently outlined mineralised footprints in
E69/3464, and along the 12km Sweetwater and 9km Navajoh Southeast Trends that occur within the
100% RTR E69/3787 and E69/3862 tenements.
•
Metallurgical studies
o Variability and composite samples provided by diamond and sonic drilling will be collected to confirm the
simple and conventional flowsheet, and further improve the flotation performance. Additionally, value
adding beneficiation work (dense media separation and ore sorting) will commence once sufficient
volumes of cored material have arrived from site.
•
Scoping studies
o Work will commence on initial supporting scoping studies for the Earaheedy Project, which will review
some of the early development scenarios/options.
3
Figure 4 - Mato Prospect – EHRC733-740 geology section with assay results highlighted for the EHRC733 mineralised interval.
4
About the Earaheedy Project
The emerging, world class Earaheedy Zn-Pb-Ag Project is located 110km northeast of Wiluna in Western Australia,
with access to major highways, power (gas pipeline), rail, ports, airports and experienced mining workforce (see Figure
5). The Project includes tenement (E69/3464), which forms the Rumble Resources Ltd 75% / Zenith Minerals Ltd
(ASX: ZNC) 25% Joint Venture (“JV”), E69/3787, E69/3862 and newly added applications E69/4124, E69/4149 and
E69/4165, which are all 100% controlled by Rumble (see Figure 2).
Rumble announced a major discovery on 19th April 2021 and 2 years later to the day on 19th April 2023, announced
a globally significant, pit constrained, maiden inferred Mineral Resource Estimate (MRE) of 94Mt @ 3.1% Zn+Pb and
4.1g/t Ag (at a 2% Zn+Pb cutoff) – refer to ASX release 19th April 2023. This maiden MRE confirmed the Earaheedy
Project as one of the largest global zinc sulphide discoveries in the last decade. The strength of the MRE is supported
by a 41mt of higher-grade resources that could be part of a possible early development scenario, and a much larger
462Mt resource that could potentially be upgraded via beneficiation, providing the project with significant future
flexibility.
The Project has exceptional near-term growth potential, with the deposits open in all direction and less than 35% of
the 45km mineralised Unconformity Unit (host to the current resources) effectively drill tested, whilst none of the thick
underlying geologically fertile formations which could potentially host high-grade MVT deposits having been tested.
The sheer scale, optionality, location and extraordinary growth potential of Earaheedy could see the Project stamp
itself as a world class, multi decade asset and play a key role in the future global renewable energy transition.
Figure 5 - The Earaheedy Zn-Pb-Ag-Cu Project location and existing infrastructure within Western Australia
5
Authorisation
This announcement is authorised for release by Peter Venn, Interim Managing Director of the Company.
-EndsFor further information visit rumbleresources.com.au or contact info@rumbleresources.com.au.
Previous Drill Results
Drill hole results are ongoing and previous assays have been reported in earlier ASX announcements.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ASX Release 23/8/2019 – 14 High Priority Targets and New Mineralisation Style
ASX Release 23/1/2020 – Large Scale Zn-Pb-Ag Discoveries at Earaheedy
ASX Release 19/4/2021 – Major Zinc-Lead Discovery at Earaheedy Project, Western Australia
ASX Release 2/6/2021 – Large Scale Zinc-Lead-Silver SEDEX Style System Emerging at Earaheedy
ASX Release 8/7/2021 – Broad Spaced Scout Drilling Has Significantly Increased the Zn-Pb-Ag-Mn footprint at
Earaheedy
ASX Release 23/8/2021 – Earaheedy Zn-Pb-Ag-Mn Project – Exploration Update
ASX Release 13/12/2021 - New Zinc-Lead-Silver Discovery at Earaheedy Project
ASX Release 21/12/2021 – Major Zinc-Lead-Silver-Copper Feeder Fault Intersected
ASX Release 20/1/2022 – Two Key Tenements Granted at Earaheedy Zn-Pb-Ag-Cu Project
ASX Release 31/1/2022 – Shallow High-Grade Zn-Pb Sulphides Intersected at Earaheedy
ASX Release 21/2/2022 – Further High-Grade Zn-Pb Results and Strong Grade Continuity
ASX Release 9/3/2022 – Major Expansion of Zn - Pb Mineralised Footprint at Earaheedy
ASX Release 26/5/2022 - Multiple New High-Grade Zn-Pb Zones defined at Earaheedy
ASX Release 18/7/2022 – Heritage Clearance Confirmed- Sweetwater drilling Commenced
ASX Release 23/08/2022 – Significant Zones of Zn-Pb Sulphides Intersected
ASX Release 30/08/2022 – High grade Zn-Pb drill intercepts at Tonka
ASX Release 29/09/2022 – New 2.2km High Grade Chikamin Feeder Zone extends Chinook
ASX Release 3/11/2022 – High Grade System Discovery Chinook inc. 3.37% Cu 4450g/t Ag
ASX Release 17/11/2022 – Exceptional Metallurgical Results at Earaheedy Project
ASX Release 16/02/2023 – Multiple New High-Grade Feeder Targets Defined
ASX Release 14/03/2023 – Chinook Zn-Pb Prospect expands to 8km strike
ASX Release 19/04/2023 – Maiden Resource Confirms Earaheedy's World Class Potential
ASX Release 03/05/2023 – Heritage Clearance Received for Navajoh Southeast Trend
ASX Release 01/06/2023 – High impact drilling commences at the Earaheedy Project
ASX Release 17/07/2023 – Zinc Lead Mineralisation Discovered in Drilling
About Rumble Resources Ltd
Rumble Resources Ltd is an Australian based exploration company, officially admitted to the ASX on the 1st July 2011. Rumble was
established with the aim of adding significant value to its current mineral exploration assets and will continue to look at mineral acquisition
opportunities both in Australia and abroad.
Competent Persons Statement
The information in this report that relates to Exploration Results and Exploration Targets is based on and fairly represents information
compiled by Mr Luke Timmermans, who is a Member of the Australian Institute of Geoscientists. Mr Timmermans is an employee of
Rumble Resources Limited. Mr Timmermans has sufficient experience relevant to the style of mineralisation and type of deposit under
consideration and to the activity which he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the
“Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves”. Mr Timmermans consents to the inclusion
in the report of the matters based on his information in the form and context in which it appears.
Previously Reported Information
The information in this report that references previously reported exploration results is extracted from the Company’s ASX market
announcements released on the date noted in the body of the text where that reference appears. The previous market announcements
are available to view on the Company's website or on the ASX website (www. asx.com.au). The Company confirms that it is not aware of
any new information or data that materially affects the information included in the original market announcements. The Company confirms
that the form and context in which the Competent Person’s findings are presented have not been materially modified from the original
market announcements.
6
Disclaimer
This report contains certain forward-looking statements and forecasts, including possible or assumed reserves and resources, production
levels and rates, costs, prices, future performance or potential growth of Rumble Resources Ltd, industry growth or other trend projections.
Such statements are not a guarantee of future performance and involve unknown risks and uncertainties, as well as other factors which
are beyond the control of Rumble Resources Ltd. Actual results and developments may differ materially from those expressed or implied
by these forward looking statements depending on a variety of factors. Nothing in this report should be construed as either an offer to sell
or a solicitation of an offer to buy or sell securities. This document has been prepared in accordance with the requirements of Australian
securities laws, which may differ from the requirements of United States and other country securities laws. Unless otherwise indicated, all
ore reserve and mineral resource estimates included or incorporated by reference in this document have been, and will be, prepared in
accordance with the JORC classification system of the Australasian Institute of Mining, and Metallurgy and Australian Institute of
Geoscientists.
7
Table 1 – Drill Hole Location, Intersections and Assay Table – Mato Prospect
Hole ID
E MGA
N MGA
Depth
(m)
Dip
EHRC585*
247073
7167828
240
-90
Azi
From
(m)
To
(m)
Width
(m)
0.5%
Zn +Pb
1.27
0
200
208
8
incl.
205
205
2
2% Zn
+ Pb
4% Zn
+ Pb
6% Zn
+ Pb
2.56
Ag
g/t
S%
Zn
%
Pb
%
3.79
2.5
0.86
0.41
5.75
1.77
1.62
0.95
EHRC716
240721
7167935
202
-90
0
162
164
2
0.56
0.53
0.16
0.36
0.2
EHRC717
240996
7168208
240
-90
0
190
198
8
2.08
1.68
0.67
1.51
0.57
incl.
190
194
4
1.36
0.67
2.09
0.77
EHRC718
241139
7168343
238
-90
0
225
238
13
2.1
4.6
0.72
0.73
incl.
225
227
2
2.2
3.05
3.58
1.04
1.16
2.22
2.86
1.45
incl.
230
234
4
1.7
3.99
1.35
0.91
EHRC719
241649
7168030
178
-90
0
170
172
2
1.56
9.6
6.18
0.57
0.99
EHRC720
242491
7167865
172
-90
0
154
168
14
2.49
3.01
2.87
1.4
1.09
incl.
161
163
2
5.6
7.61
2.38
1.74
4.12
EHRC722
243976
7167239
172
-90
0
142
148
6
0.8
1.04
0.27
0.59
0.22
EHRC723
244070
7167422
172
-90
0
144
151
7
1.08
2.28
1.75
0.69
0.39
EHRC724
244228
7167687
214
-90
0
146
168
22
1.2
1.01
2.33
0.86
0.35
EHRC725
244459
7167838
230
-90
0
185
196
11
2.5
4.19
8.12
1.92
0.58
incl.
189
192
3
4.63
13.92
3.35
0.74
EHRC726
244925
7167411
198
-90
0
104
150
46
1.12
1.8
0.77
0.27
incl.
104
108
4
5.8
5.79
3.81
1.35
4.09
1.04
5.16
EHRC727
241297
7168484
234
-90
0
210
212
2
0.55
1.3
2.56
0.34
0.21
EHRC728
241456
7168592
246
-90
0
226
232
6
2.03
3.08
7.98
1.72
0.31
EHRC729
241624
7168708
250
-90
0
223
228
5
1.04
4.18
7.95
0.44
0.6
EHRC730
240439
7169120
241
-90
0
198
206
8
1.53
2.35
2.1
1.07
0.46
EHRC731
245867
7167259
186
-90
0
148
158
10
2.23
2.4
1.81
1.73
0.51
EHRC732
244171
7167593
193
-90
0
165
174
9
3.15
6.1
6.77
1.75
1.4
incl.
167
170
3
5.8
6.78
2.25
1.27
and
171
174
3
4.13
6
7.32
2.23
1.91
0
153
170
16
5.09
6.28
9.14
3.9
1.18
incl.
157
167
10
6.76
11.92
5.75
1.3
EHRC733
238473
7168698
202
-90
*Previously not reported
8
3.53
7.05
Table 2 – Mato RC Drill Hole Collar Positions – Assays Pending
Hole ID
EHRC734
EHRC735
EHRC737
EHRC738
EHRC739
EHRC740
E (GDA94 Z51)
238719
238566
238617
238667
238763
238865
N (GDA94 Z51)
7169132
7168875
7168956
7169048
7169217
7169391
Depth (m)
203
234
219
222
228
241
Dip
-90
-90
-90
-90
-90
-90
Azi
0
0
0
0
0
0
Area
Mato
Mato
Mato
Mato
Mato
Mato
Table 3 - Sulphide Estimate % for holes with pending laboratory assays.
Hole ID
EHRC734
EHRC735
EHRC737
EHRC738
EHRC739
EHRC740
From
(m)
174
182
186
192
198
180
182
186
192
198
203
188
Interval
(m)
8
4
6
6
5
8
188
193
193
203
170
175
193
198
203
208
175
180
5
5
10
5
5
5
Pyrite Sphalerite Galena
Sphalerite
Pyrite Galena
Pyrite Sphalerite Galena
Pyrite
Pyrite Galena
10 - 15%
1 - 2%
1 - 2%
1 - 2%
0.1 - 1%
1 - 2%
Sulphide
Sulphide
Transition
Sulphide
Transition
Sulphide
180
189
190
205
215
206
189
205
205
215
217
214
7
18
15
10
2
8
Pyrite Sphalerite Galena
Pyrite
Pyrite Sphalerite
Pyrite Sphalerite Galena
Pyrite
Pyrite Sphalerite
15 - 20 %
1 - 2%
1 – 2%
5 – 10%
1 – 2%
1 – 2%
Sulphide
Sulphide
Sulphide
Sulphide
Sulphide
Sulphide
214
219
229
219
229
231
5
10
2
Pyrite Sphalerite
Sphalerite Galena Pyrite
Pyrite Sphalerite
2 – 5%
10 - 15%
1 – 2%
Sulphide
Sulphide
Sulphide
To (m)
Pyrite Sphalerite
Pyrite Sphalerite Galena
Pyrite Sphalerite Galena
Pyrite Sphalerite Galena
Pyrite Sphalerite
Pyrite Galena
Observed %
Total Sulphide
2 - 5%
5 - 10%
10 - 15%
5 - 10%
2 - 5%
2 - 5%
Observed
Domain
Sulphide
Sulphide
Sulphide
Sulphide
Sulphide
Transition
Observed Sulphide Species
9
Section 1 Sampling Techniques and Data
Criteria
JORC Code explanation
Sampling
techniques
• Nature and quality of sampling (e.g. cut channels,
random chips, or specific specialised industry
standard measurement tools appropriate to the
minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments,
etc.). These examples should not be taken as
limiting the broad meaning of sampling.
• Include reference to measures taken to ensure
sample representivity and the appropriate
calibration of any measurement tools or systems
used.
• Aspects of the determination of mineralisation that
are Material to the Public Report.
• In cases where ‘industry standard’ work has been
done this would be relatively simple (e.g. ‘reverse
circulation drilling was used to obtain 1 m samples
from which 3 kg was pulverised to produce a 30 g
charge for fire assay’). In other cases more
explanation may be required, such as where there
is coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (e.g.
submarine nodules) may warrant disclosure of
detailed information.
• Drill type (e.g. core, reverse circulation, open-hole
hammer, rotary air blast, auger, Bangka, sonic, etc.)
and details (e.g. core diameter, triple or standard
tube, depth of diamond tails, face-sampling bit or
other type, whether core is oriented and if so, by
what method, etc.).
•
•
RC face hammer sampling (5.5in
diameter). Rig used was an Atlas
Copco 220 with 1250cfm air and
435psi compressor.
• Method of recording and assessing core and chip
sample recoveries and results assessed.
• Measures taken to maximise sample recovery and
ensure representative nature of the samples.
• Whether a relationship exists between sample
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of
fine/coarse material.
•
RC drilling cuttings were collected
as 1 metre intervals with
corresponding chip tray interval
kept for reference.
In general the dry sample versus
the wet sample weight did not vary
as the wet sample was collected in
a polyweave bag which allowed
excess water to seep and kept the
drill cutting fines intact in the bag.
• Whether core and chip samples have been
geologically and geotechnically logged to a level of
detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical
studies.
• Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc.)
photography.
• The total length and percentage of the relevant
intersections logged.
• If core, whether cut or sawn and whether quarter,
half or all core taken.
• If non-core, whether riffled, tube sampled, rotary
split, etc. and whether sampled wet or dry.
• For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
• Quality control procedures adopted for all subsampling stages to maximise representivity of
•
Drilling
techniques
Drill sample
recovery
Logging
Subsampling
techniques
and sample
preparation
Commentary
10
•
•
•
•
•
•
RC sampling completed on 1m
intervals using Metzke Static cone
splitter is dry. If wet, sample
collected in large polywoven, then
allowed to dry for 24 hrs. Sampling
was by spear along inside of bag.
Weight of sample was on average
>2kg.
Samples sent to ALS, Malaga,
Perth, WA and are being assayed
using a four acid digest and read
by ICP-AES analytical instrument.
At total of 33 elements are
reported including Ag, Al, As, Ba,
Bi, Ca, Cd, Ce, Co, Cr, Cu, Fe, K,
La, Li, Mg, Mn, Mo, Na, Ni, P, Pb,
S, Sb, Sc, Sr, Th, Ti, Tl, U, V, W,
Zn.
pXRF analysis utilises a Vanta
Olympus XRF analyser and
involves a single shot every metre
(RC) with routine standards (CRM)
Each metre was geologically
logged with pXRF analysis.
All drill cuttings logged.
RC Drilling as below:
o Each metre was analysed
by a Vanta pXRF. The
Vanta used standards
(CRM).
o If the assay response was
>1000ppm Zn, a sample
(>2kg) was taken and
delivered to ALS for wet
Criteria
JORC Code explanation
Commentary
samples.
• Measures taken to ensure that the sampling is
representative of the in situ material collected,
including for instance results for field
duplicate/second-half sampling.
• Whether sample sizes are appropriate to the grain
o
size of the material being sampled.
Quality of
assay data
and
laboratory
tests
Verification
of sampling
and
assaying
Location of
data points
Data
spacing and
distribution
Orientation
of data in
relation to
geological
structure
Sample
security
Audits
reviews
or
analysis.
Sampling QA/QC involved
a duplicate taken every
20m, and a standard taken
every 20m. 4 standards
(OREAS CRMs) levels
and one blank were used
randomly.
• The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or total.
• For geophysical tools, spectrometers, handheld
XRF instruments, etc., the parameters used in
determining the analysis including instrument make
and model, reading times, calibrations factors
applied and their derivation, etc.
• Nature of quality control procedures adopted (e.g.
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of accuracy
(i.e. lack of bias) and precision have been
established.
• The verification of significant intersections by either
independent or alternative company personnel.
• The use of twinned holes.
• Documentation of primary data, data entry
procedures, data verification, data storage (physical
and electronic) protocols.
• Discuss any adjustment to assay data.
• Accuracy and quality of surveys used to locate drill
holes (collar and down-hole surveys), trenches,
mine workings and other locations used in Mineral
Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
• Data spacing for reporting of Exploration Results.
• Whether the data spacing and distribution is
sufficient to establish the degree of geological and
grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s)
and classifications applied.
• Whether sample compositing has been applied.
•
• Whether the orientation of sampling achieves
unbiased sampling of possible structures and the
extent to which this is known, considering the
deposit type.
• If the relationship between the drilling orientation
and the orientation of key mineralised structures is
considered to have introduced a sampling bias, this
should be assessed and reported if material.
•
• The measures taken to ensure sample security.
•
All sampling packaging and
security completed by Rumble
personnel, from collection of
sample to delivery at laboratory.
• The results of any audits or reviews of sampling
techniques and data.
•
No audits completed.
11
•
•
•
•
The
assigned
assaying
methodology (4 acid) is total digest.
As discussed, the Vanta pXRF
analyser was used to threshold the
collection of samples for wet
analysis.
In addition to Rumbles QA/QC
methods (duplicates, standards
and blanks), the laboratory has
additional checks.
Significant intersections reported
by company personnel only.
Documentation and review is
ongoing. Prior to final vetting,
entered into database.
•
All drillhole collars surveyed using
handheld GPS – Datum is MGA94
Zone 51.
•
No resource work completed. The
RC drilling is reconnaissance
(scoping) by nature with drill hole
spacing on average 500m x 100m
apart.
Single metre and composites
used.
•
•
•
Previous drilling (and historic) has
defined a consistent flat lying
sedimentary package.
Drilling is normal (90°) to the
mineralised intersections. True
width reported. No bias.
A single traverse of angled RC
holes completed to ascertain if
footwall structures could be
determined. The single traverse
was at -60 and represented
approximately 85% of true width.
Section 2 Reporting of Exploration Results
Criteria
JORC Code explanation
Mineral
tenement and
land
tenure
status
• Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or national
park and environmental settings.
• The security of the tenure held at the time of
reporting along with any known impediments to
obtaining a licence to operate in the area.
•
The Earaheedy Project comprises
of E69/3464 (75% Rumble and
25% Zenith Minerals – JV),
E69/3787 and E69/3862 (100%
Rumble) and newly acquired
tenure E69/4124, E69/4165 and
E69/4149 (all 100% Rumble)
•
All Tenements are in a state of
good standing and have no known
impediments to operate in the
area.
Exploration
done by other
parties
• Acknowledgment and appraisal of exploration by
other parties.
•
Exploration solely completed by
Rumble Resources
Geology
• Deposit type, geological setting and style of
mineralisation.
•
The Earaheedy Project Deposit
type is considered to be a MVT
variant (Irish Style in part).
Mineralisation is predominantly
stratiform sediment unconformity
hosted in both carbonate and
clastic flat lying lithologies.
Drill
hole
Information
• A summary of all information material to the
understanding of the exploration results including
a tabulation of the following information for all
Material drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation
above sea level in metres) of the drill hole
collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
• If the exclusion of this information is justified on
the basis that the information is not Material and
this exclusion does not detract from the
understanding of the report, the Competent
Person should clearly explain why this is the
case.
•
Table 1 – Drill Hole Location,
Intersections and Assay Table –
Mato Prospect
•
Table 2 – Mato RC Drill Hole
Collar Positions – Assays Pending
•
Table 3 - Sulphide Estimate % for
holes with pending laboratory
assays.
•
Historic drilling cut-off grades
used include: o 0.5% Zn o 0.5%
Zn + Pb o >0.1% Zn
The Zn:Pb ratio is variable over
the project area. On average the
Zn:Pb ratio for sulphide is 3. The
average Zn:Pb ratio for oxide is
0.8.
Historic drilling – if diamond
drilling or RC composite –
weighted average used.
Data
aggregation
methods
•
•
•
Relationship
between
mineralisation
widths
and
•
•
Commentary
In reporting Exploration Results, weighting
averaging techniques, maximum and/or
minimum grade truncations (e.g. cutting of
high grades) and cut-off grades are usually
Material and should be stated.
Where aggregate intercepts incorporate
short lengths of high-grade results and
longer lengths of low-grade results, the
procedure used for such aggregation should
be stated and some typical examples of
such aggregations should be shown in
detail.
The assumptions used for any reporting of
metal equivalent values should be clearly
stated.
These relationships are particularly
important in the reporting of Exploration
Results.
If the geometry of the mineralisation with
12
•
•
•
Drilling is vertical. Mineralisation is
flat. Width of mineralisation is true
width.
Criteria
JORC Code explanation
intercept
lengths
•
Diagrams
•
Commentary
respect to the drill hole angle is known, its
nature should be reported.
If it is not known and only the down hole
lengths are reported, there should be a clear
statement to this effect (e.g. ‘down hole
length, true width not known’).
Appropriate maps and sections (with scales)
and tabulations of intercepts should be
included for any significant discovery being
reported These should include, but not be
limited to a plan view of drill hole collar
locations and appropriate sectional views.
•
Figure 1 – EHRC733 sulphide
examples and sieved Navajoh
Unconformity Unit. Left: EHRC733
select sieved sulphide bearing
samples from interval 159-160m
showing coarse sphalerite,
galena, and pyrite. Right:
EHRC733 sieved Navajoh
Unconformity Unit host lithology
chips from 165-166m
•
Figure 2 - Earaheedy Project –
Location of Chinook and TonkaNavajoh Deposits, and the Mato
Prospect with partial
Share your feedback
Discover